Balançoire 3 en 1

Androni 3 in 1 Swing combines a convertible seat layout with rope suspension for active play that changes as use needs change. The molded swing seat starts with a backrest and T-bar for the earliest stage, then converts to a more open form before becoming a basic swing seat, creating a clear progression across the marked 0-3, 3-5 and 5+ stages. The cord is pre-assembled, the swinging height is approx. 120 cm, and the seat width is 28 cm. The instructions show the backrest, front restraint and side elements locking into place with click fittings, so each stage is built around the same main seat shell. For installation, the seat height is set between 35 cm and 40 cm above the ground using the plastic adjusters on the ropes. The guidance also specifies at least 2 m clearance from obstacles, side spacing of at least 60 cm, and a maximum excursion of 60° during use. Maximum load is 60 kg. This swing suits garden frames as well as indoor mounting on suitable structures, provided the setup follows the stated installation guidance. In everyday use, the changing seat formats support gentle swinging for smaller children and a simpler open seat for later stages, so the same swing remains in use across several phases of play.